The overall counter consists of columns, cabinet bodies, and countertops. The front and rear sides of the cabinet are made of 8mm thick steel plates, and the steel plates are reinforced with steel structures in the middle (with hot-rolled ribbed steel bars with a diameter of not less than 10mm or angle steel supports with a thickness of not less than 5mm at intervals of not more than 400mm in height and width directions) and connected to form the cabinet. The length of the cabinet shall not be less than 1500mm, the height shall not be less than 800mm, and the thickness shall not be less than 240mm. The cabinet is securely connected to the ground or wall using 8 16mm diameter bolts, making it difficult to disassemble. The frame is made of steel with specifications not less than [14] or L63 × 5 angle steel, and is firmly connected to the columns, ground, and roof.
The length of the cash register slot is 300mm, the width is 200mm, and the depth is 150mm. An 8mm thick steel plate is installed facing the teller side to strengthen the protection, and the protection strength is better than the industry standard.